The structure and function of the universal joint are somewhat like the joints on human limbs. It allows the included angle between the connected parts to change within a certain range.
Rolling cutting method. In addition to cutting and feeding movements, rolling cutting tools also roll compared with gear machining. Its characteristic is that only one tool is needed to process mic...
Gears are generally used in "places" where compact transmission structure, multiple speed changes, large speed change ratio, large transmission power and high transmission accuracy are required.
Forged steel is the main material for making a gear, because it has relatively high strength and toughness. The general method can be divided into soft tooth surface and hard tooth surface.
Gearbox is an important component widely used in mechanical transmission. When a pair of gears are engaged, due to inevitable errors such as tooth pitch and tooth profile, meshing impact will occur...
Change the transmission direction. For example, we can use two sector gears to vertically transmit the force to another rotating shaft.
The commonly used gearbox lubrication methods include gear oil lubrication, semi fluid grease lubrication and solid lubricant lubrication. Gear oil can be used for those with good sealing, high spe...
Acceleration and deceleration are commonly referred to as transmission gearbox.
The gearbox must have enough rigidity to bear the force and torque to prevent deformation and ensure transmission quality when it bears the force from the wind wheel and the reaction force generate...
The PTO DriveShaft is applied to the power transmission of modern agricultural machinery, the most common power transmission between tractors and agricultural machinery or between the power output ...
LanguageLanguage